Specification for Basement Waterproofing

During residence or business construction, basement waterproofing is an important step. Due to the character of a basement, being subterranean, it’s simple for water to flow through the surrounding earth and to the cellar causing water issues. Problems like leaking, rot, and mold are not unusual. It’s not suggested that the owners try and perform waterproofing themselves as there are very strict guidelines that must be followed to get a proper result. It’s ideal to hire a builder that understands the job requirements.

Waterproofing Basement Concrete

To waterproof the concrete a mix of an additive comprising silica fume, and also a large range water reducing admixture will be mixed. The quantity that is mixed will be contingent on the needs of the particular basements for strength and workability. It’s not uncommon to find the contractor perform a couple of trial and error combinations so the best mix is utilized on the concrete itself.

Basements offer a special set of factors to be waterproofed properly, and also often-times with varying combinations. There are several specifications that must be met to ensure a waterproof basement along with some good contractor know-how about the variances.

You will find a few particular areas that need special care:

Sealing the Details and Joints

All of the details and joints must be treated with another waterproofing mix other than the concrete. A flexibal PVC waterbar will be utilized for movement and construction joints. Before using the waterbar all the concrete substrate has to be completely clean since the PVC waterbar will bond directly with the concrete surface. For every other cellar details a hydrophilic membrane has to be installed by bonding or nailing to the waterproof concrete.

Protecting the Basement

For the basement slab, the builder will install a waterproofing membrane. In prep for the membrane the initial basement structure has to be designed to minimise movement from temperature fluctuation through the varying seasons, and also be completely smooth and flat to avoid puncturing the membrane. Ensuring these requirements are satisfied, a 4mm thick, thick torch-on, waterproofing membrane will be used. The membrane itself offers a barrier against water out of moisture abundant soil contact and other groundwater. The installation is going to be completed before pouring the concrete slab. The water barrier membrane will probably be lain horizontally and will float by a minimum of 100mm and all seams sealed using a roller. Optionally a bituminous membrane should be applied to shield the sheet from of puncturing.

As you can see it is necessary to hire a waterproofing contractor or construction service that specializes in basement waterproofing. There are a great deal of actions that in particular need to be performed to ensure that the cellar will remain waterproof and trouble free for years to come.

This entry was posted in Home Remodeling and tagged , , , , , , . Bookmark the permalink. Both comments and trackbacks are currently closed.